When you have an old tank, remove it instead of recycling it. The downsides of keeping the old tank can outweigh any of the benefits. The process of tank removal and underground storage tank removal depends on several factors, the most important being the type of tank itself. This article explains just what tank removal is and a process you can use when doing so.
What is Tank Removal?
Tank removal is the term used to describe removing a tank from the ground. A tank is a large container that holds oil or gas and can be buried underground. Tanks are sometimes called storage tanks or cisterns, and they are used in homes and businesses for storing drinking water or other liquids.
You may need to remove an old tank if you have one leaking or damaged by fire or flood. When this happens, you can call in a professional to remove the tank and haul it away, so you do not have to worry about further damage. Removing an old tank can be dangerous if done incorrectly; we recommend hiring professionals who know what they are doing regarding removals like this one.
Process of Tank Removal
Tank removal service is removing an underground storage tank that has been decommissioned. There are several steps involved in this process.
Initial Contact
The first step in the tank removal process is contacting a certified, licensed and insured company specializing in this work. You should be able to find one by searching online or asking friends and family for recommendations. Make sure that any potential companies you contact are registered with the Environmental Protection Agency (EPA). This will ensure they are properly insured and have met all their state’s regulations.
Site Assessment and Paperwork
After you have decided on a contractor and signed an agreement, they will perform a site assessment. This includes measuring the size of the tank, locating it using ground penetrating radar or other methods, assessing any damage that has occurred over time, identifying any utilities running through or near the area where your tank is located, and making sure that it is safe for them to begin work there without causing any harm to yourself or others nearby.
Disconnecting the Tank
The important step in tank removal is to disconnect it from the building. You can do this by cutting off its supply lines or removing any fixtures attached to the tank. The next step is to drain out any remaining fuel from the tank. This can be done by using a pump to remove all of the liquid or through siphoning. Once the fuel has been removed from the tank, you will need to remove any insulation or protective barriers used during storage. Next, you will need to remove any supports for the tank and then cut off any pipes or other connections that are still connected to it.
Tank Removal
Tank removal is a process that involves the complete decontamination and removal of tanks from soil and groundwater. Removing tanks is a critical step in the remediation process since tanks can cause contamination to nearby soil and groundwater. Aboveground storage tank removal is typically completed through excavation, meaning that the tank will be removed from its current location and relocated to another location where it can be disposed of safely.
Site Cleanup and Disposal of Waste Materials
The step in the tank removal process is to remove any hazardous or combustible materials that have been exposed to the environment. This includes any exposed fuel tanks, oil or lubricants that may have been released from leaking tanks, or any other chemicals or materials that might cause harm if left in their current state. Once these materials are removed from the site, they are disposed of according to federal and state regulations for hazardous waste disposal.
Soil Testing to Determine Whether Soil Remediation is Needed
You can skip this step if you are sure the tank was removed correctly and that no problems remain. However, it is still a good idea to test the soil around the site of your tank removal to ensure no issues need to be addressed before building or digging begins. If there are any problems, they will be identified during this process and can be remediated before building or digging commences.
Backfilling and Final Report
Once this is done, you can begin backfilling around the top of your containment system with dirt and rocks until it is completely covered up again. This will seal off any leaks or spills that could happen during transportation or storage of hazardous materials in future years. When all this is done, you will need to file a final report with your state agency overseeing environmental regulations where you live before being allowed to transport any hazardous materials on public roads or waterways again.
Conclusion
This article is a short one that will guide you through the tank removal process. There are many hazards associated with tank removal, and you should not take them lightly. The tank contains volatile and flammable liquids that can cause devastating results if not handled properly. Be sure you understand what you are doing before attempting this project yourself.
