Home Tech Uncut Guide to Solve Linksys AC2200 Velop Yellow Light Issue

Uncut Guide to Solve Linksys AC2200 Velop Yellow Light Issue

by Uneeb Khan
0 comment
linksys-velop-ac2200-setup

Are you experiencing a technical issue with your Linksys AC2200 Velop router? Which issue is that? Is it the yellow light issue? Well, this issue might be troubling you because of a number of reasons. One of the major reasons is an improper Linksys AC2200 setup. However, let us not get into that. Instead, you should focus more on how it can resolved. For that, follow the troubleshooting hacks outlined in this article. By the time, the last hack has surfaced, the Linksys AC2200 Velop yellow light issue would have surely said goodbye to you. Thus, get down to reading this instant.

Read More:- Function and design Linksys velop setup without app

[Solved] Linksys AC2200 Velop Yellow Light Issue

  1. Restart the Linksys AC2200

If you have not tried to restart your Linksys AC2200 Velop router yet, then you should not waste any more time doing that. The reason being, sometimes, technical glitches can cause much bigger issues than expected. And the only way to eliminate them is to restart your Velop router.

You can restart your Velop router by following just a few steps. All you need to do is, turn off the device, wait for a couple of seconds, and then, turn on the device. See? It was that simple. Now, check if you are able to turn the yellow light to green. If not, wait no more to move to the next troubleshooting hack.

  1. Check the Nodes Connection

Another reason why you stuck with the Linksys AC2200 Velop yellow light issue because the connection between the nodes located on your device is not right.

Therefore, make sure that the connection between the nodes is proper. If even after taking care of that, you are unable to fix the yellow light issue, then it looks like the issue is much bigger than we anticipated. But, worry not. One of the following hacks will surely help you to troubleshoot it, and that to soon.

  1. Update the Velop Firmware

Performing firmware update from time to time is important if you want your Linksys AC2200 Velop router to function well. But, it seems that you did not update the firmware of your device in time. Otherwise, the LED light on your device would not be blinking yellow.

But anyway, you can take care of the problem by updating the firmware of your device. That can be done if you switch on your device and open an internet browser on it. Next, visit the default Linksys Velop login page and go to the Settings tab. Soon, you will asked to follow some steps to finish the firmware update process.

  1. Eliminate WiFi Interference

Are you still a victim of the Linksys AC2200 Velop yellow light issue? Well, that is not good. You should check where your device is located right now. If the area also sharing its location with smart home appliances, the LED on your device was bound to flash yellow.

We can say this because such appliances known to emit electromagnetic waves that interrupt signals. Therefore, consider shifting your Linksys Velop router to some other place and make sure that smart home appliances not kept near it.

Want to know about examples? Well, they include cellular phones, washing machines, baby monitors, treadmills, aluminum studs, televisions, refrigerators, Bluetooth speakers, mirrors, fish tanks, and microwave ovens.

  1. Perform Factory Default Reset

The last hack through which there chance that you will able to troubleshoot the Linksys AC2200 Velop yellow light issue factory default reset. After performing this hack, your device will go back to being new. It means that all the settings that you have customized till now will get erased. Are you prepared to handle that kind of thing?

Well, in that case, it recommended that you follow this section. It has the steps following which you can reset your device:

  • Locate and press the Reset button.
  • Wait for some time.

When you are done resetting your device, use the Linksys router login IP to set up your Linksys AC2200 Velop router from scratch.

Final Note

After following the troubleshooting hacks given above, you will be able to fix the Linksys AC2200 Velop yellow light issue. Which was the hack that you found most useful? Do let us know.

You may also like

Businesszag logo

Businesszag is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: info@businesszag.com

@2022 – Businesszag. All Right Reserved. Designed by Techager Team