Patches have always been in fashion for ages. They are widely used and accepted in the US and UK as a significant part of the marines uniform. Plus, these tiny attributes gained massive recognition in the 70s and early 90s era. In those times, rappers and punk stars were gazing the limelight away from actors of Hollywood. They made their establishment strong through various customizations, which they do with their distinctive style. The most prominent ones were the alteration of ragged denim jackets with tons of badges and patches over the panels.
Further, it gained another boost when the usage crossed the shore and started using them in items like backpacks, as part of the uniform, and as a collectible item. Though there are many kinds of insignias just like its name. But the widespread ones are called: Embroidery badges, woven, Velcro, hook and loop, and many others…
But, here we are not discussing its types and distinctive characteristics. On the contrary, we are showing you how you can make these embellishments using embroidery machines.
So, read along and create these amazing pieces with ease in your home! With tons of added tips and tricks.
WHAT SUPPLIES DO YOU NEED?
PATCH FABRIC:
the ideal fabric for this purpose is twill patch fabric, which is durable and can stand wear and tear easily. Also, make sure to buy crinoline backing, which is heavy-duty and easily bendable.
POINTED SHARP NEEDLES:
without using a pointed needle, the task will be paused at the very start, so it is advisable to buy a bunch at least. Plus, a needle is necessary; it will penetrate the fabric’s fiber deep down by making the stitching process smooth.
FIRM BACKING:
embroidery badges need a steady and solid backing. So, it can be sewn with ease without twilling the overall quality. Although there are numerous cheap options, use the one that is long-lasting and resilient.
DIRECTIONS: STEP BY STEP
Follow these steps to create a perfect embroidery design by using a custom embroidery patches maker machine.
STEP 01:
Cut the fabric according to the size of the badge you want. Then after cutting it and trimming the edges, place it in the side of the machine that has a needle attached to it. After placing the desired fabric on the panel plate of the machine, place the tracing sheet onto it to create a lasting grip.
STEP 02:
Here comes the second step, where you will initiate the level of making your embroidery patches formally. After the placement, you will scale the density and begin the calculation of where to start the thread pouncing. Once you target the bull’s eye, keep the flow intact throughout the process.
STEP 03:
In this step, you will keep an intense glance over the needle and how it is moving by adapting to the design. The recommended needle sharpness is to use 11 or 12 points, to make the entire process flow in an orderly manner.
STEP 04:
After you have copied the entire design, make sure there are no ragging threads or dangling edges left. Plus, if you want to give it a sleeker look like the one’s custom patches UAE are made. Then erase the stencils line which you have made while calculating the design graph.
STEP 05:
This is where you stick the adhesive on the backside if you are opting for this route. There are several good-quality sticky backings available. But choose those who have a longer life and can stand machine washing too.
STEP 06:
This stage is for those who opted for the heat seal backing option. You have secured the backup by stitching those two sides with the design; make sure it has a solid, well-rounded grip aligned with the overall edges.
STEP 07:
Make sure the seal of the iron on the badge is secured and can withstand the heating temperature without melting the entire design. Though, if you are about the bulk load emblems, it is suggested to test the 1st prototype of it.
THE ULTIMATE STEP 08:
Here you will activate the heat patch by pressing the hot iron over it while the face will be dropped down on the targeted apparel. Keep monitoring the heat at regular interval if all goes well. VOILA, your hard work paid off.
TIPS AND TRICKS TO FOLLOW
- Using felt as the background of your badge is ideal because it is incredibly cheap. Plus, it can stand quite a few washes easily.
- If you want your tiny insignias to be long lasting till eternity, so without any further fluff, sew them with a strong thread by hand.
- Always trim the edges, as ruffling of threads can easily tear your patch by a single dangle of fiber.
- Use those threads that don’t bleed colors; fast colors ones are ideal for such useful purposes.
- A digital cutting machine is better for trimming the edges if the production is done on a mass level.
- Using the adobe illustrator CC version for design mapping is a good tip; it will give you a calculative result that will cover the entire border area of the badge.
- If there is a large-scale industrial order for crests, then use laser cut for a refine and smooth look.
- Suppose you are in this business stream, so to stand apart. In that case, the usage of metallic thread can enhance the overall outlook of the patch.
- Another trick to upsell your products is to use the 3-dimensional technique, a little play with the mind and alter in the plan can boost sales.
- Many companies are using 3D foam to give a puffy look to their badges; this is something unique and raises the bar of exceptionality.
- If you want to be eco-friendly, use water-soluble embroidery film, as it will dissolve when the time is near discard it.
- If you are an old-school manufacturer, using the hot knife for slicing up the edges would be an ideal option for you.
- Some clients demand the badges should have the tendency to be displaced on a variety of surfaces. This is where you introduced the pin backing attached on the backside. Turning that piece into a brooch can modify the complete look.
TO SUM UP
Making patches is tedious and demands tons of machines and human resources. Though in today’s time, the usage of ultra-modern and high-tech equipment has shed a load of work. But, again, some companies prefer to use old-school methods to be in the game. Here in this blog, we have mentioned manufacturing embroidered ones through the mechanism at every step. Plus, we also added some amazing tips and tricks as a bonus feature, exclusively for you.
