One of the most important steps to Cleaning your house is wiping down all the light switch plates and door jambs. Wiping these down will help you to avoid smudges and dirt that can build up over time. In addition to wiping down door jambs, you should also dust light fixtures and ceiling fans.
Clean baseboards
You can make it easier to clean baseboards in your home by using the following tips. Before you begin, make sure to clear off any furniture so you can reach the baseboards easily. If you are dealing with a large piece of furniture, it is best to move it elsewhere. Nevertheless, you can still clean baseboards in large pieces of furniture even if they are dirty. Always remember to clean the baseboards in a downward motion, starting from top to bottom, so as to collect any debris that may fall.
If you do not feel comfortable bending down, consider using a cotton swab soaked in cleaner. Cotton swabs are great for cleaning these hard-to-reach areas because they are small enough to fit inside the tight spaces and still absorb a lot of cleaner.
Dust light fixtures
One of the easiest ways to keep your light fixtures looking new and dazzling is by cleaning them regularly. To clean light fixtures properly, you should use a dry microfiber cloth or a duster. You can also use a mixture of vinegar and water to remove stubborn stains. However, you should not apply the cleaning solution directly to the light fixture, as this could damage it. Make sure to allow the light fixture to dry completely before you reinstall it.
First, you should remove all pieces from the light fixture, such as the glass shades and bulbs. Use a microfiber cloth to dust the light fixture thoroughly, making sure to get into the crevices and corners. After dusting, you can wipe the light fixture with a dry microfiber cloth and use a mild all-purpose spray to wipe away dust and cobwebs. Do not use a wet cleaning solution on glass light fixtures, as it may cause damage to the glass.
Dust ceiling fans
The first step in dusting your ceiling fans is to remove any loose or stuck dust from the motor and blades. The blades can get covered in pillowcase dust and need special care when dusting, so be sure to wipe them off carefully. A microfiber cloth is a good tool to clean the blades. Also, use a compressed-air canister to remove dust from the motor housing.
You can also use a vacuum cleaner to clean the blades. Make sure to hold it at an angle so that you can reach the blades. Once you’re done vacuuming, use a damp rag or sponge to wipe off the dust. This will help you avoid tripping on the blades.
Wipe down door jambs
Cleaning the door jambs is a simple, but important, part of house maintenance. Doors have drains at the bottom that trap dirt. Using a small wire brush, clear these drains and wipe down the door jambs. Vinyl and plastic door panels can be cleaned with soap and water, and then dressed with a protectant. Rubber door jambs can be wiped with a damp rag.
After wiping down the door jambs, you should use a cleaning solution to disinfect and clean the door frame. Use a clean sponge or cloth to apply the solution to the door. Make sure to avoid leaving any excess water on the door frame, as this can cause marks on painted surfaces. Wipe off any excess water using a clean cloth or towel.
Clean plastic seals on fridges
Cleaning the plastic seals on fridges is a relatively simple process, but you must use the right products to get the best results. Avoid using ammonia, bleach, or petroleum distillates as they can damage the gasket. You can also use diluted bleach on the gasket, but do not leave it sitting on the gasket for a long period of time.
It is important to check the gasket seal of a refrigerator at least twice a year to ensure that it is still in good shape. To do this, simply lift up the gasket and check the grooves on the underside. If you find any grit, use a wet sponge to clean them. Food residue on the rubber can diminish the efficiency of the gasket and can even cause pitting and warping. If these damages are left untreated, they may require a complete replacement.
Clean wall doodles
The walls of your home should be regularly washed, not only to maintain their fresh look, but to extend the life of the paint as well. Natural cleaning solutions such as baking soda and white vinegar are excellent options for scrubbing the walls without removing paint. But note that baking soda can leave behind a stubborn white film.
Clean shower curtains
There are several ways to clean your shower curtains and make them look new again. The first method is to wash them using a vinegar solution. This solution will be safe for most types of shower curtains. If they are stained with dirt or mildew, you can also add some baking soda to the water to help get rid of the stains. Afterward, you can hang the curtains to dry on the curtain rod.
Another method involves using a coconut scrubber sponge and brush. The scrubber paste will help you remove stubborn stains and odor. After using it, rinse the area with water. You can also use a spray bottle filled with one part vinegar to four parts water. Spray the shower curtain with the solution and allow it to sit for about 20 minutes before rinsing it.
Source : شركة تنظيف بالرياض
